Adhesive cable tie mounts and cable clips, made in Italy for 30 years
We design and mould cable tie mounts, adhesive cable clips, screw mount bases and wiring kits. Industrial acrylic adhesive, free samples to test before you order.
Our moulding department, Albignasego (PD), Italy
- 30 yearsin business
- Over 50 millionparts produced in a year
- ISO 9001:2015certified quality system
- REACH, RoHS, IMDSdeclared compliance
Five families, one problem each
Each family solves one specific thing. Start from the one closest to your problem: inside you will find a table to pick the part number, not a list.
Adhesive bases for cable ties
The point where the cable tie grips the machine, with no drilling. Nine part numbers, tie slots from 4.0 to 19 mm, also in a metal detectable version.
Adhesive cable clips
The cable held exactly where it belongs: round, flat, side entry or adjustable, with the double-sided tape chosen for your surface.
Screw mounts for cable ties
When the hole is already there, or when adhesive is not the right answer: oily surfaces, hot sheet metal, specifications that require mechanical fastening.
Cable ties
From 2.5 to 12 mm wide and from 6 to 114 kg minimum loop tensile strength, releasable versions included.
Wiring kits
Bases, clips, mounts and ties together, for installers who do not want to place five orders.
The size you need is not in the catalogue
Then the part gets designed. We design the component: the mould can be one of ours, yours, or built specifically for the project.
Not sure which double-sided tape
The criterion almost nobody uses is not maximum temperature, it is how well the tape holds under load over time. We compared it against the datasheet values and our own pull tests.
Why it pays to deal with the manufacturer
A short supply chain, in Europe
We mould and apply the adhesive in Albignasego, near Padua, Italy. No weeks at sea and no import duties within the European Union: deliveries travel by road, and you can come and see the supplier.
We design the component
Bases, clips and mounts are born here, from the problem they have to solve. That is why we can modify them when your application needs it.
We apply the adhesive ourselves
Moulding and adhesive application happen in the same plant. If the adhesive is the critical point of your application, you talk directly to the people who apply it.
We measure the numbers
The holding forces we publish are our own tests, with method and surface stated. Samples are free: test before you order.
Distributors and resellers
The catalogue is also available for resale: private label, custom packaging and bags, part numbers and datasheets ready for your own catalogue. A stable European source alongside your Asian supply, for when duties and transit times become a risk.
