Adhesive cable clamp for round cables
Our cable clips for round cable are the ideal solution for cable laying where quick assembly, high safety, and long-term durability are required.
A cable clip holds a single cable, or a small bundle, exactly where it has to run. The part number is decided by two things only: the diameter of what you are holding, and the surface you are sticking it to. Everything else follows.
Thirteen part numbers, round cable from 5.5 to 25.4 mm, flat cable, side entry and adjustable versions. Packs of 100, natural or black, six adhesives to choose from.
Which clip do you need
1. Round cable: what diameter
| Cable diameter | Part number | Family |
|---|---|---|
| up to 5.5 mm | 1038 | round cable |
| 7.9 to 10.3 mm | 1051 | adjustable |
| up to 11.5 mm | 1039 | round cable |
| 10.0 to 12.5 mm | 1052 | adjustable |
| 12.65 to 15.4 mm | 1053 | adjustable |
| up to 18.0 mm | 1041 | R-type, for bundles |
| 16.5 to 20.1 mm | 1054 | adjustable |
| 22.5 to 25.4 mm | 1055 | adjustable |
2. Flat cable or side entry
| Cable opening | Part number | Family |
|---|---|---|
| slot 9.0 by 2.8 mm | 1031 | side entry |
| slot 11.3 by 2.8 mm | 1032 | side entry |
| 7.0 mm, 20 mm base | 2514 | flat cable |
| 7.0 mm, 25 mm base | 2515 | flat cable |
| 7.0 mm, 30 mm base | 2516 | flat cable |
Side entry clips let the cable in from the side once the clip is already stuck down, so you do not have to thread the cable through: on a finished harness that is the difference between a five second job and taking the connector off.
3. Which adhesive
The last two letters of the part number are the adhesive, and this is the choice that decides whether the clip is still there in two years.
| Adhesive | Code | Service temperature | Character |
|---|---|---|---|
| Standard | AS | -30 to +60 °C | Rubber based, Easy-Peel system, fast to apply |
| Special | AP | -40 to +60 °C | Rubber based, high hold, no liner |
| Standard acrylic | CS | -40 to +100 °C | Acrylic, Easy-Peel, good hold when hot |
| Special acrylic | CX | -30 to +90 °C | Special acrylic, high hold values |
| High performance | CP | -40 to +105 °C | Reaches full strength 24 hours after application |
The criterion almost nobody uses is not the maximum temperature, it is how long the bond holds under a continuous load. We compared them with the data sheet figures and with our own tensile tests in the guide to choosing the double-sided tape.
Showing all 5 results
Adhesive cable clip for flat cables
Adhesive cable clips for flat cables are ideal for laying single or flat wires.
Adjustable adhesive cable clamp
Adjustable cable clips are the ideal solution for quickly and efficiently laying cables, cable bundles, or tubes of different diameters.
Cable clamps with adhesive for round cable R-type.
R-type cable clips are ideal for laying large-diameter cables, cable bundles, or tubes.
Side-entry adhesive cable clip
Our side entry cable clips are the ideal solution for cable laying, requiring quick assembly, high safety, and long-term durability.
Technical data
| Item | Value |
|---|---|
| Material | PA 6.6 |
| Flammability | V2 to UL94 |
| Service temperature | -35 to +85 °C |
| Standard colours | Natural, black |
Other colours available on request. REACH, RoHS and IMDS compliance declared. Quality system certified to ISO 9001:2015.
Packaging
Standard pack of 100 pieces for every part number and every adhesive version. Larger quantities and dedicated packaging on request.
If the size you need is not in the table, the part gets designed: we draw the component ourselves. How a custom project works.
Tell us about your application
With AGSPLAST adhesive cable clips, you can speed up system installation, creating neat and easy-to-maintain cabling. The different types of double-sided tape ensure an ideal application on all surfaces without the risk of detachment.
Cable clips allow for neat, secure, and easy-to-maintain cabling, reducing installation costs due to quick usage. AGSPLAST adhesive cable clips are an essential component for installers, as they allow for the orderly securing and directing of various types of cabling without the need for tools or cable ties. They are suitable for securing multiple cables, including wires, flat and round cables, cable bundles, and tubes.
The available sizes also allow their use with cables of different diameters and on any surface, provided they are properly cleaned before application. Furthermore, their features make them ideal for applications in:
- Tight and confined spaces
- Where drilling for plugs or screws is not possible
- When minimizing the visual impact is desired
The range of adhesive cable clips offered by AGSPLAST meets most market needs. Additionally, the different types of double-sided tape used allow for their use on many different surfaces and with varying weight loads:
- Fast-fix cable clip line with a standard rubber-based adhesive
- Standard acrylic adhesive used in the Easy-fix cable clip line
- UltraFix-G cable clips, using our unique rubber-based adhesive
- UltraFix-A cable clip line with unique acrylic-based adhesive
Our customers most commonly use the Fast-Fix cable clip line. It can meet a wide variety of application needs, especially standard ones. Thanks to the Easy-Pill system, it also saves up to 35% of application time, thus reducing installation costs. Also, contact our staff if the desired product is unavailable in the catalogue.
